Tổng hợp thiết bị được cung cấp bởi GREENTECH | Greentech Vietnam | Part 166

Correct: Humidity and Temperature Transmitter PTU3031B01A1BCPK1A0A1AAB1B0A

Pressure range: 500…1100 hPa, Probe cable length : 2 m cable, +80 °C, no additional temperature probe, Graphical display with keypad. Power supply: 10…35 VDC, 24 VAC

Output signal: RS232C + Analog outputs (Ch1 & Ch2, optional Ch3), Cable gland M20*1.5

Pressure fitting: Barbed fitting for 1/8″ hose

Humidity sensor: General purpose and high chemical concentrations – HUMICAP180R

Sensor protection: PPS plastic grid & stainless steel netting, spare: DRW010281SP

Probe installation accessories : Duct Installation kit, item 215003

MMT162-C1DBB0AA60A1X

Transmitter type: Metal housing, NPT 1/2″ thread

Analog output + RS-485 as standard: 4…20mA

Sensor protection: Stainless steel grid filter, standard

Cable for analog output and power supply: 2 m (6.6 ft) cable, M8 threaded connector, 90° angle

Package: Cardboard single package

User’ s guide: Multilingual quick guide

(HMT3307S0A01BBAB120A0AACBAA)

Humidity and Temperature Transmitter

Cable length: 2 m cable =) Cuộn tròn được

Parameters: RH+T, Signal output : 4… 20 mA.

Power supply: 10..35 VDC, 24 VAC with galvanic isolation,

Option for module slot 1: RS-485 serial interface (galvanically isolated)

Cable bushings: Cable gland M20 x 1.5

Humidity sensor type: General purpose and high chemical concentrations HUMICAP180R

Sensor protection: PPS plastic grid & stainless steel netting DRW010281SP

Installation kit for probe: Duct installation kit, item: 210697

Code: HM42

HM40 Hand-Held Humidity and Temperature Meter

Probe: Standard probe (directly attached HMP113)

Batteries: Alkaline batteries, Package: Standard

User’s guide language: English

Humidity and Temperature Transmitter

Parameters: RH+T, Display on transmitter cover

Number of analog output: 2 analog output channels (Ch1 + Ch2)

Interface cable connection: Cable gland M20x1.5 for cable diameters 7.5 … 12 mm, Ex certification and issuer: TIIS (Japan)

Portable dewpoint meter

Indicator type :rechargable with all AC adapters

indicator Accessories: MI70LINK software with RS232 cable (MI70LINK)

Probe type: DMP74B -60…+20°C Td

Pro accessories: sampling cell DSC74

Connection Cable to a Transmitter: no

Carrying Case : soft carrying case (MI70SOFTCASE)

10 m extension cable for the MI70 probes

DMT340SERV

Note: Sorry but the DRW221587 is not a sales item. If it is question of a broken transmitter which would need a new probe, you should contact our Service Center for repair of the instrument

(Probe (5m, +180C) DRW221587)

(HMP110-C15A0C5A0)

0…5 V

CH1 RH

CH2 T -40…+80’C

Plastic grid with filter

HUMICAP180R sensor

No probe cable

Noted: Order code is C15A0C1A0 if no need cable

DMT242-A1A1A2J

(DMT242)

consist of:

Td Range -80…+20C Td 4…20mA

No Cable, Connector Only

Pressure setting 1 bar abs

Sensor protection Stainless Steel Sintered Filter (37um)

No PC accessories

Sampling Cell, Swagelok 1/4″ Male Connectors, DMT242SC2

Useer’s guide in Japanese

The price includes a traceable calibration certificate for each unit.

Note: The manufacturing of the HM34C Meter has been terminated . And the model is replaced with a new generation product family HM40, , nearest replacement is the model HM41.

(Code: HM34C)

Model: HMP75

consist of :

-MI70 Indicator with rechargeable battery (all AC adapters)

-Probe HMP77 for RH 0….100 % and temperatures -70….+180 °C (also other probe models available, please see the datasheet and order form)

-English manual

(Vaisala HM70

1. Màn hình hiển thị MI70 Indicator

SL: 1

2. Dây nối sensor loại Probes: HMP77

SL: 1

3. Sensor : Humicap 180RC (chemical purge, sensor preheat)

SL: 3 )

Note: Please note that the unit must always be recalibrated after sensor change.

The price includes a traceable calibration certificate for each unit.

HM40-A1AB

Model: HMP77

– Rechargable MI70 Indicator with AC-Adapters

– MI70Link ( pc software + USB cable)

– DMP74B dewpoint probe Td = -60….+20°C

– DSC74 Sampling cell with quick connect fitting

– carrying case

– English manual

(DM70B5B2A3B1)

LiCl Salt Bag 11%RH

(Vaisala 19729HM)

MgCl2 Salt Bag 33%RH

(Vaisala 19730HM)

NaCl Salt Bag 75%RH

(Vaisala 19731HM)

K2SO4 Salt Bag 97%RH

(Vaisala 19732HM)

(sensor Humicap 180)

The 229010HM is not available with this part number, its spare part code is that 15778HM

(Sensor Intercap 229010HM)

Code: DM70 – B5B1A3B1 (DM70 B 5 B 1 A 3 B 1)

HM34C Meter has been terminated and the model is replaced with a new generation product family HM40

Code: DPT146 – B1DBD110A0X(DPT146 B 1 D B D 1 1 0 A 0 X)

Standard Specification:

• NPT 1/2″ thread.

• Dewpoint, Pressure, ppm, Td/f atm.

• Analog output Ch1 & Ch2 + RS-485 as standard: 4…20 mA.

• Function for Ch1: Dewpoint -80…+20 °C (-112…+68 °F).

• Function for Ch2: Pressure (absolute) 0….10 bar (0 …145 psia).

• Output units: Metric units (Celsius, bara)

• Cable for analog outputs and power supply (Port I): 0.3 m (1.0 ft) shielded cable, M8 threaded connector

• Cable for RS485 line and power supply (Port II): None

• Installation accessories ONLY for ISO1/2″ thread: None

• Special features: None

• User’ s guide: Multilingual quick guide

-80…+20C Td 4…20mA

(71F20B1BCPK1A0A1ACB0B2A)

(HTM310 5A5A1BCX14BJDA1A2)

Description:

– model HMT315 for high temperatures

– RH+T measurement

– analog outputs 4..20 mA

– Ch1 RH 0…100%RH, Ch2 T X special range (please specify before ordering)

– sensor cable 5 m

– etc. , please see the Order form

(HMT330 – 810A121BCAL100A01AVBAA1)

(HTM3303F0A001BCAC100A0AACBAA1)

– RH+T transmitter, model HMT333

T range electronics-5 ..+55 ‘C

T range probe-40/-70..+180 ‘C

Outputs 0-1 V 0-5V 0-10V 0-20 mA

Vin 10..35 DC 9..24 AC depends of output Filter sintered Dimensions 55 x 42 mm probe cable 1500 mm probe length 215 mm probe material SS

HMM100 series replacement (% = any valid choice) HMM100 34A1D% Notes, Issues actions Plastic probe alternative: 32A1C% Preconfiguration of desired output recommended

Correct code: HMM100-34A1DE

(DMT152 – A1DBE11A330A1X)

(DMT142 has been ended)

• G½ mechanical connection

• 4…20 mA

• Analog output scaling -80…+20 °C Td

• Alarm LED set point off

• Pressure setting for optimized accuracy 5 bar

• 3 m cable

• Weight:

– ISO G1/2” threaded version : 90g

– NPT G1/2” threaded version : 100 g

– Rechargable MI70 Indicator with AC-Adapters

– DMP74A dewpoint probe Td = -40….+60°C

– Two-Pressure Sampling Cell with Coil DSC74C

– Carrying case MI70CASE3 (light grey weatherproof hard plastic

– English manual

(DM70B3B0A3B10)

• NPT ½’’ thread mechanical connection

• 4…20 mA

• Analog output scaling -80…+20 °C Td

• Alarm LED set point off

• Pressure setting for optimized accuracy 7 bar

• 5 m cable

This code consisting of:

Indicator with UK AC-Adapter

Probe MMP78 including special sensor for fluids

MI70LINK software with USB cable

aw + T + ppm, specific transformer oil type, oil type must be specified

1.9 meter + extension cable 10m

MI70CASE4 Weather-proof plastic case for indicator and the probe

User´s Guide MM70 in English

(HTM333GOA001 BC100A01ACBAA1)

Calibration Services for HMT330

221150 – DAKBAAAAA