Bơm hóa chất GY model – Induction motor: High discharge head, large flow | Nikkiso Vietnam

(0 đánh giá)

Mã sản phẩm : GY model – Induction

Xuất xứ : Nikkiso Vietnam | Greentech Vietnam

Bảo hành : 12 tháng

Bơm hóa chất GY model – Induction motor: High discharge head, large flow | Nikkiso Vietnam

Chi tiết
Thông số kỹ thuật
SẢN PHẨM TƯƠNG ĐƯƠNG
LIÊN HỆ

Bellows type metering pump

Nikkiso Eiko Bellows type metering pumps include the GS series, which use a small capacity synchronous motor; the GX series, which uses a shaded-pole motor; the GY series, which uses an induction motor; and the GD series, which uses a DC motor. We have a diverse line-up of models that can support the needs of our customer, including various applications, built-in equipment, etc. Creating a multi-purpose model by combining different sized Bellows type pumps is also possible.

Features

Discharge accuracy

Accuracy is ±1.5% at the maximum stroke length for freshwater. High accuracy is attained when operating with a maximum stroke length of 50% or more.

Leak proof

There are no leaks because there is no shaft seal portion.

Self –priming Capable

For clean water at a normal temperature priming is not necessary until 0.7m degrees, because it is self-priming.

Dry operation available

Dry operation is possible since there are no friction components.

Long service life

Superior flexing capabilities of polypropylene, which has excellent corrosion resistance, provides millions of cycles under normal operating conditions.

Corrosion resistance

The body of the pump uses polypropylene, and the poppet valve and O-ring use EPDM, FPM, and CSM, to allow handling of acids, alkali, and various other corrosive liquids.

Liquid Temperature

Maximum is 60℃. When exceeding 50℃, maximum discharge pressure will be half or less than the value displayed on the table below. Be careful if you exceed 40℃, because the liquid’s corrosivity will increase. Usage is not recommended at low temperatures (0℃ or below).

Application

Vending machines

Preparation of high viscosity syrups, metered addition of food additives

Printing and wiring board etching and cleaning

Water and drainage acid processing, alkali neutralization, and flocculent infusion

Metered infusion of various chemical liquids

Wide range of applications for additives and various types of liquid chemical bleaching agents

Specifications

GS model – Synchronous motor: Instant stop, large flow

	Maximum flow rate	690/827mL/min (50Hz/60Hz per single head)
	Maximum discharge pressure	0.2MPa

GX model – Shaded-pole motor: High discharge head, large flow

	Maximum flow rate	1490/1788mL/min (50Hz/60Hz per single head)
	Maximum discharge pressure	0.35MPa

GY model – Induction motor: High discharge head, large flow

	Maximum flow rate	2475/2970mL/min (50Hz/60Hz per single head)
	Maximum discharge pressure	0.35MPa

構造

Please feel free to contact us for inquiries and requests

PRODUCTS

- là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

[ Email ] | |
Online contact========

Yahoo: nhan.luongthe
Skype: luongthenhan
===================

Greentech Trading Service Company Limited

[ Main Office ] 33 Street DC5, Son Ky Ward, Tan Phu District, HCM City, Vietnam

[ Branch Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam

[ Tel & Fax ] + 84 (0) 28 3816 1314
[ Website ] |

[ Face Page ]

-------------------------------

Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement

Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic

Ø Valve - Pipes, tubes and fittings