EJ1N-TC | EJ1N-DRT | Omron | Module điều khiển nhiệt độ | Omron Vietnam

(0 đánh giá)

Mã sản phẩm : EJ1N-TC | EJ1N-DRT |

Xuất xứ : Omron Vietnam | Greentech Vietnam

Bảo hành : 12 tháng

EJ1N-TC | EJ1N-DRT | Omron | Module điều khiển nhiệt độ | Omron Vietnam

Chi tiết
Thông số kỹ thuật
SẢN PHẨM TƯƠNG ĐƯƠNG
LIÊN HỆ

Ordering information

Type	Control points	Control outputs	Auxiliary outputs	Other functions	Terminal	Order code
Basic unit	2	2 voltage (pulse)	2 transistor (NPN)	2 CT input + 2 event input	M3 screws	EJ1N-TC2A-QNHB
Basic unit	2	2 voltage (pulse)	2 transistor (NPN)	2 CT input + 2 event input	Screw-less clamp	EJ1N-TC2B-QNHB
Basic unit	2	2 current	2 transistor (NPN)	2 event input	M3 screws	EJ1N-TC2A-CNB
Basic unit	2	2 current	2 transistor (NPN)	2 event input	Screw-less clamp	EJ1N-TC2B-CNB
Basic unit	4	4 voltage (pulse)	-	-	M3 screws	EJ1N-TC4A-QQ
Basic unit	4	4 voltage (pulse)	-	-	Screw-less clamp	EJ1N-TC4B-QQ
High function unit	-	-	4 transistor (NPN)	4 event input	M3 screws	EJ1N-HFUA-NFLK
High function unit	-	-	4 transistor (NPN)	4 event input	Screw-less clamp	EJ1N-HFUB-NFLK
DeviceNet unit	-	-	-	-	Screw connector	EJ1N-HFUB-DRT
Ethernet unit	-	-	-	-	3 x RJ45	EJ1N-HFU-ETN
End unit	-	-	2 transistor (NPN)	-	M3 screws	EJ1C-EDUA-NFLK
End unit	-	-	2 transistor (NPN)	-	Removable Connector	EJ1C-EDUC-NFLK

Type	Control points	Control outputs	Auxiliary outputs	Other functions	Terminal	Order code
Basic unit	2 (GTC)	2 voltage (pulse)	2 transistor (NPN)	2 CT input	M3 screws	EJ1G-TC2A-QNH
Basic unit	2 (GTC)	2 voltage (pulse)	2 transistor (NPN)	2 CT input	Screw-less clamp	EJ1G-TC2B-QNH
Basic unit	4 (GTC)	4 voltage (pulse)	-	-	M3 screws	EJ1G-TC4A-QQ
Basic unit	4 (GTC)	4 voltage (pulse)	-	-	Screw-less clamp	EJ1G-TC4B-QQ
High function unit	- (GTC)	-	4 transistor (NPN)	-	M3 screws	EJ1G-HFUA-NFLK
High function unit	- (GTC)	-	4 transistor (NPN)	-	Screw-less clamp	EJ1G-HFUB-NFLK
End unit	-	-	2 transistor (NPN)	-	M3 screws	EJ1C-EDUA-NFLK
End unit	-	-	2 transistor (NPN)	-	Removable Connector	EJ1C-EDUC-NFLK

Accessories

Current transformer

Diameter	Order code
5.8 dia.	E54-CT1
12.0 dia.	E54-CT3

Communications and cables

Description	Order code
G3ZA connecting cable 5 meter	EJ1C-CBLA050
USB programming cable	E58-CIFQ1
PC based configuration and tuning software CX-Thermo	EST2-2C-MV4
PROFIBUS Gateway	PRT1-SCU11

Specifications

Item	Type	EJ1_-TC2	EJ1_-TC4
Power supply voltage		24 VDC
Operating voltage range		85% to 110% of rated voltage
Power consumption		4 W max. (at maximum load)	5 W max. (at maximum load)
Input (see note)		Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PLII ES1B Infrared Thermosensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, 140 to 260°C. Analog input: 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 V Platinum resistance thermometer: Pt100, JPt100
Input impedance		Current input: 150Ω max., voltage input: 1 MΩ min.
Control outputs	Voltage output	Output voltage: 12 VDC ±15%, max. load current: 21 mA (PNP models with short-circuit protection circuit)
	Transistor output	Max. operating voltage: 30 V, max. load current: 100 mA	-
	Current output	Current output range: 4 to 20 mA or 0 to 20 mA DC Load: 500 Ω max. (including transfer output) (Resolution: Approx: 2,800 for 4 to 20 mA DC, approx. 3,500 for 0 to 20 mA DC)	-
Event inputs	Input points	2	-
	Contact input	ON: 1 kΩ max., OFF. 100 kΩ min.	-
	Non-contact input	ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.	-
		Outflow current: approx. 4 mA per point	-
Number of input and control points		Input points: 2, control points: 2	Input points: 4, control points: 4
Setting method		Via communications
Control method		ON/OFF control or 2-PID (with autotuning, selftuning, Heat & Cool autotuning and non-linear cool output selection)
Other functions		Two-point input shift, digital input filter, remote SP, SP ramp, manual manipulated variable, manipulated variable limiter, interference overshoot adjustment, loop burnout alarm, RUN/STOP, banks, I/O allocations, etc.
Alarm output		2 points via End unit
Communication		RS-485, PROFIBUS, Modbus, DeviceNet	RS-485, PROFIBUS, Modbus, DeviceNet
Size in mm (W×H×D)		31×96×109
Weight		180 g
Ambient temperature range		Operating -10°C to 55°C, Storage -25°C to 65°C (with no icing or condensation)
Ambient humidity range		Operating 25% to 85% (with no condensation)

Dimensions

Item	Size in mm (H×W×D)
EJ1N-HFU_-NFL_	95.4×31.0×104.9/109.0
EJ1N-HFUB-DRT	90.9×31.0×82.2
EJ1C-EDU	95.4×15.7×76.2/79.7

1.For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control.
On the 4-point models, heating/cooling control can be performed for two input points only.

2.When using the heater burnout alarm, purchase a Current Transformer (E54-CT1 or E54-CT3) separately.

3.This unit mounts to the left of the CelciuX° (EJ1) configuration and enables PROFINET or Modbus/TCP network connection. Combine the HFU-ETN with an EDU_-NFLK end unit to use with other devices supporting Modbus-RTU like E5_N temperature controllers and MX2 Inverters.

4.An End unit is always required for connection to a Basic unit or an HFU. An HFU cannot operate without a Basic unit.

5.Heating/cooling control is not supported for gradient temperature control.

6.When using the heater burnout alarm, use a Current Transformer (E54-CT1 or E54-CT3) (sold separately).

7.An End-unit (EDU) is always required to connect an HFU and or a Basic TC unit for Communications and Power supply.
A GTC (Gradient Temperature Control) basic TC unit always requires a GTC HFU unit.

8.Inputs are fully multi-input. Therefore, platinum resistance thermometer, thermocouple, infrared thermosensor, and analog input can be selected.

Rating Voltage VAC	Freq. Hz	Power Current AMP	Power Consumption WATTS	Speed RPM	Air Flow CFM	Static Pressure (Inch-H2O)	Noise (dB(A))

ZLKZ-2	Máy khống chế lực	AOST
BES M12M1 PSC20B BV03	Inductive sensor	Balluff
IP-600-9TH	ph sensors	Jenco
DVX-15-A110V	DVX15 (3/2 Double valves press valves)	Top-Air
252-PVPW	Relay	Crompton
HD-1150K	handhel thermometer	Anritsu
C-2000	moisture meter	Delmhorst Instrument Co
185B	humy tester ii	MESDAN
171702	High Pressure Level Control	McDonnell & Miller
	Glossmeter Gloss Meter Tester 0-200Gu	WALCOM
	Coating Thickness Gauge	TMTeck
	Speed sensor, non-contact with Pulse Output from 0 to 20kHz	OMEGA
	Trip Amplifier, (PROJECT # U1192)	Elcontrol
		Lenze
	LINEAR POSITION TRANSDUCER	Balluff
	Flow Switch	Honsberg
	Flow Switch	Honsberg
	Hardness tester	Delmhorst Instrument Co
PO-9091	Digital Pocket Microscope	BYK Gardner
Type No. 7201	Air flow moniter	Base Ten System
DSD 100 K64U22P	Motor	Baumuller
SRS50-HZA0-S02	Encoder	Sick
Serial No: 693223	Flow Indicator	Inconel
Serial No: 200604155	Digital BCD Meter	Canopus Instruments
Serial No: 423056	APPLICOM PCI-DPIO	Woodhead
PKV 40-DPS	Signal converter profibus to ethernet	hilscher
A-11B-0.5-140	Capacitor	ICAR
EH 700-30-11	Contacter	ABB
EMZ-2215-E-V007	Card inverter	Lenze
RHM0600MD701S1G1100	Position Sensors	MTS Sensors
RHM0250MD701S1G2100	Position Sensors	MTS Sensors
MXG4-DN63-0/400bar- NPT 1/4	Pressure gauge
MXG4-DN100-0/400bar- NPT 1/2	Pressure gauge
BNA20 – 2RZ-M16	Công tắc từ - Magnetic swich
2RHF-600-D-06-65-03-S	Encoder
1794 –ADNK	Devicenet adapter	Allen Bradley
ID : 589614 -02	encoder	Hedenhain
1756-L61	CPU	Allen Bradley
BTL5-S171-M0160-P-S32		Balluff
P2210A6CCB04730	Pressure Gauge	Wisecontrol
DNW-100K	Tension Meter	Hans Schmidt
FLIR E40	Thermal Imaging	Flir
FLIR E4	Thermal Imaging	Flir
	Digital Enamel Rater	Canneed
	bộ nguồn	Lambda-TDK-Densi
	Hardness tester	PCE_Instrument
	Thickness meter	PCE_Instrument
	Three Phase SCR power controller - win power	WINLING TECHNOLOGY LTD
	encoder	Heidenhain
	Bộ chuyển đổi tốc độ	Miki pulley

LB6739W-11-CSJ-40X50	Metal level detector	Berthold
ZKB-5B4-909	Powder Clutch	Mitsubishi
RCD- M40		badger mete

- là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp,.... Bên cạnh đó chúng tôi là nhà thực hiện các giải pháp tích hợp trong công nghiêp, dân dụng, xây dựng,... Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa hiện nay

Liên hệ cho chúng tôi để CÓ thông tin mà Quý khách CẦN.

[ Email ] | |
Online contact========

Yahoo: nhan.luongthe
Skype: luongthenhan
===================

Greentech Trading Service Company Limited

[ Main Office ] 33 Street DC5, Son Ky Ward, Tan Phu District, HCM City, Vietnam

[ Brand Office ] 92/8 Huynh Thuc Khang Street, Tam Ky City, Quang Nam Province, Viet Nam

[ Tel & Fax ] + 84 (0) 28 3816 1314
[ Website ] |

[ Face Page ]

-------------------------------

Ø Flow, pressure and level measurement | Temperature and humidity measurement | Position measurement | Force measurement

Ø Optical and acoustic measurement | Electrical measurement | Hydraulics – Pneumatic

Ø Valve - Pipes, tubes and fittings