LMIX2-000-03.0-1-00 | Cảm biến thước từ LIMAX | Elgo Electronic Vietnam

(0 đánh giá)

Mã sản phẩm : LMIX2-000-03.0-1-00

Xuất xứ : Elgo Vietnam | Greentech Vietnam

Bảo hành : 12-24 tháng

LMIX2-000-03.0-1-00 | Cảm biến thước từ LIMAX | Elgo Electronic Vietnam

Chi tiết
Thông số kỹ thuật
SẢN PHẨM TƯƠNG ĐƯƠNG
LIÊN HỆ

LMIX2-000-05.0-1-00, distance measuring system

with index pulse, integrated electronic evaluation system in the sensor, square-wave signal output proportional to velocity. Resolution LMIX2 with four edge sensing: 0.025 mm/0.01 mm (LMIX2 with single edge sensing: 0.1 mm). Distance sensor/strip: max. 2.0 mm. Output current: max. 20 mA per channel, index pulse at type LMIX2 at intervals of 5.0 mm (period depends on traversing velocity). Supply/output voltage: 10 to 30 VDC, tolerance/supply voltage: stabilized, residual ripple max. 5.0 %. Current consumption: max. 150 mA. Output frequency (per channel): 40 kHz. Traversing velocity: max. 4.0 m/s. Signal cable length: 5.0 m (max. 30 m). Case: zinc die-cast. Degree of protection: IP 67. Operating temperatures: 0 to +50 °C.

Sensors

Shaft Information Systems for the lift industry

Magnetic length and angle measuring systems

up to 1/10 resolution

Magnetic length and angle measuring systems

up to 1/1000 resolution

Rotative measuring systems

Absolute

LIMAX Shaft Information Systems

Absolute measurement of the car position

For hoisting heights up to 130 m | Speeds up to 4 m/s

Absolute measurement of the car position

For hoisting heights up to 260 m | Speeds up to 10 m/s

Absolute, redundant measurement of the car position

For hoisting heights up to 260 m | Speeds up to 10 m/s

LIMAX SAFE Shaft Information and Safety System

Absolute, redundant recording of the car position.

For hoisting heights up to 260 m | Speeds up to 10 m/s

Absolute, redundant recording of the car position for the highest buildings.

For hoisting heights up to 1,500 m | Speeds up to 18 m/s

Electronic evaluation unit in which safety-relevant switching and control functions are implemented

Modular system consisting of the LIMAX33 RED sensor and the SAFE BOX.

For hoisting heights up to 260 m | Speeds up to 10 m/s

Modular system consisting of the LIMAX44 RED sensor and the SAFE BOX

For hoisting heights up to 1,500 m | Speeds up to 18 m/s

Shaft information system based on the LIMAX33 RED sensor for safe position detection. The safety-related switching and control functions are integrated in the sensor housing.

For hoisting heights up to 260 m | Speeds up to 10 m/s

Absolute

For industrial applications with a resolution of 1 mm and measuring lengths up to 1000 meters

Autoreferencing, absolute measuring system with a resolution of 1 mm and measuring lengths up to 1000 meters

Incremental

For angular and linear measurements, with 0.1 mm (0.025 mm) resolution.

Suitable for long distances, with 2.5 mm resolution.

1.0 mm resolution, up to 10 mm distance between sensor and magnetic tape possible.

Low-cost length and angle measuring system, with 0.1 mm (0.025 mm) resolution.

Round sensor with 0.1 mm (0.025 mm) resolution.

Absolute

Absolute, contactless measuring. With LED and SSI error bit if the distance between sensor and tape gets too large. Resolution 0.01 mm, for measuring lengths up to 20 meters.

Magnetic absolute length measuring system for highly dynamic controls

Absolute, guided measuring. Resolution 0,01 mm.

Incremental

Ideal for angular and linear measurements, with 0.01 mm resolution.

High Precision Length Measuring System with selectable resolution up to 0.001 mm (1 µm).

High precision length measuring system with selectable resolution up to 0,025 mm (2,5 µm).

Precision carriage for incremental measurements with pre-installed, selectable measuring system.

With speed monitoring and 5 adjustable resolutions.

Guided Length Measuring System with a mechanical cylinder with resolutions from 0,1 mm to 0,001 mm.

Magnetic-based Length Measuring System with sin/cos signal output.

Magnetic-based Length Measuring System with integrated Push-Pull signals for MIN/MAX-limit switches.

Guided Measuring System for use in press brakes with a resolution of up to 0,00122 mm.

Absolute

Magnetic absolute encoder. High resolution: 16,000 mesauring steps/rev.

Single-Turn-Encoder. Resolution of 12 bit over the whole measuring distance.

Single Axis Absolute Inclinometer. Measuring range 0° to 90° with analog output 0,5 - 4,5 V.

3 Axes Absolute Inclinometer with high resolution. Measuring range 0° to 90° +/- with 0,025° resolution.

Incremental

Suited for rotative angular measurement. Wearfree due to contactless measuring principle. Up to 10 000 revolutions/minute.

Space-saving and reasonably priced option to rotary encoders. Insensitive against environmental influences. Can be used with all standard incremental ELGO sensors.

Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, robust design, IP64.

Incremental Encoder with 500 pulses/revolution, with 6 mm steel shaft, IP54.

Incremental Encoder up to 500 pulses/revolution, with 10 mm steel shaft, IP54.

Incremental Encoder up to 1000 pulses/revolution, with 12 mm steel shaft, IP66

Hollow Shaft in miniature structural shape, IP54

Inclinometers

Absolute

Single axis absolute
inclinometer: +/- 90°
with Analogue output
0.5 - 4.5 V

High resolution 3 axis
absolute inclinometer:
+/-90°, +/-90° / +/-180°
with 0,025° resolution

Position Indicators - Power supply

1-axis mini position indicator 24 VDC

1-axis universal position indicator

1-3-axis position indicator

LED position indicator with two pre-selections and relay outputs

Universal position indicator for incremental and absloute measuring systems with relay outputs and integrated RS-232-interface

Battery-powered Position Indicators

For incremental measurements

Smalest design with integrated or external battery.

Battery-powered position indicator for length and angle measurement with resolution up to 0.01 mm

Battery powered position indicator with 7-digit LCD-display, a resolution up to 0.01 mm and "°"-symbol. Option: RS232-interface.

Battery-powered position indicator with an external sensor and 868 MHz radio transmission.

Battery-powered measuring and indicating system with large two-line LCD-display.

Electrical battery-powered handwheel with 20 mm hollow shaft, directly attachable to spindle.

For absolute measurements

Battery-powered absolute mini position indicator

Battery-powered absolute measuring and indicating system with external pluggable sensor

Battery-powered absolute 3-axis position indicator

Battery-powered absolute measuring system with integrated sensor on the back side of the indicating device.

Battery-powered absolute measuring and indicating system with large two-line LCD display

Controls

Single Axis

Compact single axis controller.
The P40 is predestined for easy positioning applications.

A single axis controller without program memory.
Suitable for simple positioning applications.

P8721 is a single axis controller with program memory. The program memory allows the processing of up to 200 address lines (proratable into blocks).

Single axis controller with an extensive parameter menu. P9521 with additional program memory.

Multiple Axes

for sheet metal shears. Intuitive interface and menu navigation, for the complete control of the cutting process.

Compact 2 axes controller.
The P40 is predestined for easy positioning applications.

Low-Cost-Terminal with positioning functions up to 6 axes. This robust and compact controller can be used in a wide range of applications.

Touch screen terminal on the basis of the IPC which is characterized by an optimal price-performance ratio and easy handling.

P8822 is a 2 axes controller which is easy in handling and enables a fast parameterization

Sensors

For Lift

Installation kit for the quick and easy installation of the magnetic tape in the elevator shaft.

General